Buff Not Enough Wax Vs Dodo Super Natural

HOMEBREW WAX 라고 한다.
또하나의 Rubbish Boy's 가 탄생할지.. ㅎㅎㅎ
뭐 간단한 리뷰라 기대나 평가는 불가능하다. 다만 이런 왁스가 만들어지고 누군가는 미친듯 도전하고 있다는 정도...
국내에도 왁스제조에 도전하는 사람들이 있는것으로 안다. 부디 좋은 결과물을 .....

도도왁스의 댓글... 뭐 미신에 관한거니 관심있는분들을 위해...
12 mins is a little quick for SN curing... maybe if it's a hot day, panel was hot etc. It benefits being left longer.
I know you 'swiped' it, but I'd personally always leave SN 20 mins plus... it takes about twice as long to cure as our basic waxes and up to 45 mins in some countries (high humidity etc).
Also, claying does not necessarily remove SN. I have seen it untouched by finer grade clays.
That said, I do get bogged down into the scientific specifics of these little tests. It adds some fun and drama to the forums, so let the games begin and good luck Buff Not Enuf

I finally got round to using it today, so the process was:

Bonnet sprayed with APC then car snow foamed.

Washed two bucket method, then the bonnet was clayed to removed previous layer of SN.

I've put down a layer of Red Moose Machine Glaze as this is the process I'll be following normally so wanted to keep this test as close to normal usage as usual.


The car was the dried and the bonnet split in two with tape. (Sorry about the pics taken on my phone the car isn't pink honest!)



So BNE was cured for 7 mins as instructed, and the SN was cured for about 12 (swipe test proved it was done) both buffed off.



Have to say the BNE went on an off very easy and has left a very nice finish, but it's durability on test here so let the clock begin!