Optimum Opti-Coating - Durability Test Review!!! 2/2

No More Beading after Power Clean:













Alcohol Wipe Down:





The Driver’s Side of vehicle was taped off for application of the sealant:







Tools used for application of the Coating:



Coating was applied to every square inch of the Driver’s side of vehicle (paint/chrome/trim/glass):





After the coating was allowed to “set up”, the tape was removed and the residual was wiped towards/into the applied section. This was to cut down the “hard line” and to not cross contaminate the uncoated side (to eliminate a sque result).





This is what the coating looks like after it’s completely dry. I used a product dampened applicator and pushed down on an inconspicuous area of the back glass. This product is literally like an epoxy-like coating of glass. This will be interesting to watch as time goes on:




After coating is applied:








Here’s 1 of the 2 ways this vehicle will be washed. The other will be with Dawn.







As you can see, after roughly 1 month beading is very strong:

Frost on car:







Rain sitting on dirty finish:







I’ll keep posting results every few months as the testing continues……..